Equipment Supplies   Shopping Trolley: Items: 0
Total Price: $0.00
All Equipment For Sale - Jim Moore Tools

Please choose the products you would like to buy from the list below. Enter the number of products you require in the Quantity Field and Click the Order Button to add the product to your Shopping Trolly. When you have finished shopping click the My Order link to proceed to the ordering area and finalise your purchase.

  
 
         
Jim Moore BEAD PRESS DIE LARGE TUBING
In Stock. Description: A Bead Press Die for flaring 3/8" to 5/8" tubing.
More Details $67.00
         
Jim Moore BEAD PRESS DIE MEDIUM TUBING
In Stock. Description: A Medium Bead Press Die for flaring 1/4" to 3/8" tubing.
More Details $67.00
         
Jim Moore BEAD PRESS DIE PLASTIC
In Stock. Description: Plastic Setting dies will set the silver cores better than any other material. The hard but flexible plastic will force the silver to follow the contours of your bead. You will need to pull hard to get the most from these dies. To operate most efficiently we recommend using a pipe over the press handle to increase your leverage. The dies will become rough with use but will continue to do their job. Plastic setting dies will set (1/4" or 6.35mm and larger)
More Details $67.00
         
Jim Moore DAPPING BALLS
These Dapping Balls are In Stock.Description: Dapping Balls (3/8", 1/2", 3/4") Use these dapping balls to dome your bead caps. You will need to supply your own dapping block. Put a dapping ball in the press and lower it into the chosen socket in the dapping block. This will center the socket under the ball so the bead cap will dome symmetrically. Place a bead cap in the socket and pull on the press, the bead cap is now domed. There are three sizes of dapping balls to choose from depending on the size of the cap and the height of the dome.
More Details $67.00
         
Jim Moore JIM MOORE OFF MANDREL TOOL
Length 32 cm
Jim Moore's own handmade tools. Faultless design with Jim's logo mark. This tool was specifically made so that you can finish your off-mandrel designs or sculptures and load it into the annealer with no punty mark or mandrel hole to clean up. This stainless steel tool has a 250mm by 9.5mm tube to hang on to and a 45mm spring loaded clamp to hold onto your work.
More Details $125.00