Equipment Supplies   Shopping Trolley: Items: 0
Total Price: $0.00
All Equipment For Sale - Jim Moore Tools

Please choose the products you would like to buy from the list below. Enter the number of products you require in the Quantity Field and Click the Order Button to add the product to your Shopping Trolly. When you have finished shopping click the My Order link to proceed to the ordering area and finalise your purchase.

 
 
         
Jim Moore OFF MANDREL TOOL
Length 32 cm
In Stock.These were the tools used in the Andrea Guarino Classes held here at Beadglass. With this tool you can finish your work on the Off Mandrel Tool and load it into the annealer with out a punty mark or mandrel hole to clean up. This stainless steel tool has a 250mm by 9.5mm tube to hang on to and a 45mm spring loaded clamp to hold onto your work.
More Details $135.00
         
Jim Moore BEASS TEXTURE STAMP BULLSEYE
10cm x 2.5cm
In Stock. These were the tools used in the recent Andrea Guarino Classes held by Beadglass. Please order over the site and if you miss out on current stock and would like to order this tool and don't mind going on to the backorder list, then please email your request to Sue at: info@beadglass.com.au Hand Stamp: 10cm wood handle with a 2.5cm diameter bronze bullseye texture pad
More Details $48.00
         
Jim Moore BRASS TEXTURE STAMP FAN
10cm x 2.5cm
In stock. These were the tools used in the recent Andrea Guarino Classes held by Beadglass. Please order over the site and if you miss out on current stock and would like to order this tool and don't mind going on to the backorder list, then please email your request to Sue at: info@beadglass.com.au Hand Stamp: 10cm wood handle with a 2.5cm diameter bronze fan shape texture pad
More Details $48.00
         
Jim Moore BRASS TEXTURE STAMP OFFSET BULLSEYE
10cm x 2.5cm
In Stock. These were the tools used in the recent Andrea Guarino Classes held by Beadglass. Please order over the site and if you miss out on current stock and would like to order this tool and don't mind going on to the backorder list, then please email your request to Sue at: info@beadglass.com.au Hand Stamp: 10cm wood handle with a 2.5cm diameter bronze offset bullseye shape texture pad
More Details $48.00
         
Jim Moore BRASS TEXTURE STAMP SHELL
In stock. These were the tools used in the recent Andrea Guarino Classes held by Beadglass. Please order over the site and if you miss out on current stock and would like to order this tool and don't mind going on to the backorder list, then please email your request to Sue at: info@beadglass.com.au Hand Stamp: 10cm wood handle with a 2.5cm diameter bronze shell shape texture pad
More Details $48.00
         
Jim Moore BRASS TEXTURE STAMP BUTTON RADIAL
10cm x 2.5cm
In stock. These were the tools used in the recent Andrea Guarino Classes held by Beadglass. Please order over the site and if you miss out on current stock and would like to order this tool and don't mind going on to the backorder list, then please email your request to Sue at: info@beadglass.com.au Hand Stamp: 10cm wood handle with a 2.5cm diameter bronze small button in the centre and radiating radial shape texture pad
More Details $48.00
         
Jim Moore BRASS TEXTURE STAMP RADIAL
10cm x 2.5cm
In stock. These were the tools used in the recent Andrea Guarino Classes held by Beadglass. Please order over the site and if you miss out on current stock and would like to order this tool and don't mind going on to the backorder list, then please email your request to Sue at: info@beadglass.com.au Hand Stamp: 10cm wood handle with a 2.5cm diameter bronze with radiating radial line shape texture pad
More Details $48.00
         
Jim Moore JIM MOORE BEAD PRESS
25 cm L x 10 cm W x 26 cm H
On Special..Reduced to 149.50 ...save $50! Limited time only! This sturdy, high quality Bead Press is used for capping and lining beads with silver tubing. An advantageous addition to the lampworkers bench, it also comes with one die that will flare up to 3/16" tubing. The accessories listed below are only available with purchase of the Jim Moore bead press. <>Further information For Video to operate see: https://www.youtube.com/watch?v=OCSLOXvU0PY http://toolsforglass.com/catalogs/beadpress_video.html <> For technical information see: http://toolsforglass.com/catalogs/info_beadpress.html http://www.youtube.com/watch?v=OCSLOXvU0PY Jim Moore Bead Presses were used in the Andrea Guarino workshops held at Beadglass which combined Precious Metal Clay and Sterling Silver Tubing to transform beautiful lampwork beads into a work of art. Email us for postage cost to your postcode.
More Details $149.50
         
Jim Moore BEAD PRESS DIE LARGE TUBING
In Stock. Description: A Bead Press Die for flaring 3/8" to 5/8" tubing.
More Details $67.00
         
Jim Moore BEAD PRESS DIE MEDIUM TUBING
In Stock. Description: A Medium Bead Press Die for flaring 1/4" to 3/8" tubing.
More Details $67.00
         
Jim Moore BEAD PRESS DIE PLASTIC
In Stock. Description: Plastic Setting dies will set the silver cores better than any other material. The hard but flexible plastic will force the silver to follow the contours of your bead. You will need to pull hard to get the most from these dies. To operate most efficiently we recommend using a pipe over the press handle to increase your leverage. The dies will become rough with use but will continue to do their job. Plastic setting dies will set (1/4" or 6.35mm and larger)
More Details $67.00
         
Jim Moore DAPPING BALLS
These Dapping Balls are In Stock.Description: Dapping Balls (3/8", 1/2", 3/4") Use these dapping balls to dome your bead caps. You will need to supply your own dapping block. Put a dapping ball in the press and lower it into the chosen socket in the dapping block. This will center the socket under the ball so the bead cap will dome symmetrically. Place a bead cap in the socket and pull on the press, the bead cap is now domed. There are three sizes of dapping balls to choose from depending on the size of the cap and the height of the dome.
More Details $67.00
         
Jim Moore BEAD RELEASER 30 cm
The BEAD RELEASER 30cm is In Stock.Description: The 30cm bead releaser is for 30cm and longer mandrels. The 23cm bead releaser is for 23cm and longer mandrels (see below). The bead releaser will remove the mandrel with little physical force or repetitive motion of the hands. Just slide the mandrel in to the tool. Twist the knob tight on a solid mandrel. Rotate the top by grabbing the mechanism close to the bead and push down. The bead will slide off the mandrel into your other hand. To remove a bead requires only a small fraction of the energy normally required. <> To see a video how to operate the Bead Releaser see: http://toolsforglass.com/catalogs/beadreleaser_video.html
More Details $236.00
         
Jim Moore BEAD RELEASER 23 cm
The BEAD RELEASER 23cm is In Stock.Description: The 23cm bead releaser is for 23cm and longer mandrels. The 30 cm Bead Releaser (see above) is for 30 cm and longer mandrels. The bead releaser will remove the mandrel from the bead with little physical force or repetitive motion of the hands. Just slide the mandrel in to the tool. Twist the knob tight on a solid mandrel. Rotate the top by grabbing the mechanism close to the bead and push down. The bead will slide off the mandrel into your other hand. To remove a bead requires only a small fraction of the energy normally required. <> To see a video how to operate the Bead Releaser see: http://toolsforglass.com/catalogs/beadreleaser_video.html
More Details $236.00
         
Jim Moore JIM MOORE D CUP SHEAR
20.5mm x 30.5mm blades
IN STOCK NOW!These shears are first quality, hand made tools specifically designed for acurately cutting and snipping glass.Designed to last a life time of use.Used by the professionals.
More Details $145.00
         
Jim Moore BRASS RIB TOOL
180mm x 30mm
In Stock. These were the tools used in the recent Andrea Guarino Classes held by Beadglass. This tool works well with powders and can also be used with silver leaf to create parallel lines of color or silver. The tool stretches the surface of the glass exposing underlying colors and can also be used to strike glass. The tool is 30mm wide by 180mm long with a 115mm handle. The edges of the rib tool are rounded and polished to protect the edges of the tool from damage.
More Details $108.00
         
JIM MOORE CUSHION PRESS 5cm x 3.7cm
26.5cm x 5cm x 3.7cm this size is variable and with a reduced volume of glass smaller 'cushion shapes can also be formed
In Stock. Amazing shape for pendants. These were the tools used in th Andrea Guarino's Classes held here at Beadglass. Made by renoun toolmaker Jim Moore, this tool creates a cushion or pillow shape. It has a 26.5cm spring steel handle with 3.7cm x 5cm variable size cushion shape press :Please note this size is variable and with a reduced volume of glass smaller 'cushion' shapes can also be formed creating multi uses on the one press.
More Details $145.80
         
JIM MOORE CUSHION PRESS 5cm x 4 cm
26.5cm x 5cm x 4cm this size is variable and with a reduced volume of glass smaller 'cushion shapes can also be formed
In Stock. Amazing shape for pendants. These were the tools used in th Andrea Guarino's Classes held here at Beadglass. Made by renoun toolmaker Jim Moore, this tool creates a cushion or pillow shape. It has a 26.5cm spring steel handle with 4cm x 5cm variable size cushion shape press :Please note this size is variable and with a reduced volume of glass smaller 'cushion' shapes can also be formed creating multi uses on the one press.
More Details $145.80