|Out of stock..GRAPHITE 4 IN ONE LARGE MARBLES SHAPER FOR PAPER WEIGHTS ETC: These are larger depressions with sizes 1¼"=31.7mm ,1½"=25.4mm, 1¾ "=44.4mm, 2"=50.8mm diameter holes. These sizes can be used for paper weights. Heat and form up a blob of glass on the end of a glass rod and shape into the marble mold hole. Rotate the glass on the rim of the hole. When the rounded shape is completed as best possible..punty up on the rounded side...and using a small attachment point remove it from the glass rod used as the original handle. Complete the rounded shape by similtaneous reheating and shaping. Repeat the above procedure until you are happy with the shape. Break off the last punty, keeping the marble in the marble mold. Then fire polish the glass nub left on the marble and put marble in an annealing kiln to cool down.